Skip to Content

GRIT Gate Control

Gate Control

Bolt-on automatic gate control for standard metal blast gates from 2.5 to 6 inches.

The GRIT Gate Control mounts to the blast gate already installed in your ductwork. When an associated tool starts or stops, the GRIT Hub commands the actuator to open or close the gate. Select the variant that matches the gate diameter without replacing the gate or changing the ductwork.

Key Features

  • Automatic gate action: Opens and closes with associated tool activity through the GRIT Hub.
  • Five sizes: Covers standard metal blast gates from 2.5 to 6 inches.
  • Retrofit mounting: Bolts onto the gate already installed in the ductwork.
  • GRIT Mesh: Coordinates gate status and commands through the Hub.
  • Daisy-chainable power: Multiple Gate Controls can share a compatible 12V low-voltage power run.
  • Status LED: Shows open or closed state at the gate.

Specifications

  • Sizes 2.5", 3", 4", 5", 6"
  • Power 12V DC
  • Fits Standard metal blast gates
  • Mounting hardware #10-24 screws sized for the selected range
  • Wire 10 ft of 18/2 solid-copper thermostat wire
  • Connectivity GRIT Mesh to GRIT Hub
  • Status Open/closed LED

In the Box

  • 1x GRIT Gate Control actuator in the size selected at checkout
  • 1x gate arm sized for the selected diameter
  • 1x slide guide set
  • 2x #10-24 screws and washer nuts sized for the selected Gate Control range
  • 1x removable 12V low-voltage terminal
  • 10 ft of 18/2 solid-copper thermostat wire

Compatibility

Fits existing standard metal blast gates from 2.5 to 6 inches. Blast gates are not sold by GRIT Automation and are not included. This product does not replace the separate GRIT iVac Retrofit Gate Control used with existing iVac gates; contact GRIT if the gate style or actuator fit is uncertain.

Installation

Match the selected actuator to the gate diameter, fasten the bracket and arm to the existing metal gate, and connect the included low-voltage wire to a GRIT 12V Power Bank or another compatible 12V DC supply. Pair the Gate Control with the Hub through the GRIT App and assign it to the corresponding tool or collection zone.

*GRIT Hub is required for device functionality. 12V Power Bank sold separately.

Important Notes

Blast gates are not sold by GRIT Automation.

$ 235.00 $ 235.00
$ 135.00
  • Size
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Frequently asked questions

Which blast gates does GRIT Gate Control fit? Do you sell the gates?

GRIT Gate Control bolts onto free-sliding metal blast gates from 2.5 to 6 inches. You keep the gate already in your ductwork; GRIT does not sell blast gates. Self-closing or spring-loaded gates won't work. If you aren't sure about your gate, email a photo to support@gritautomation.com and we'll confirm the fit before you order.

I ordered the wrong size. Do I need a whole new Gate Control?

Not if the size you need is in the same size range. Within a range, such as 3 inches to 4 inches, we can send the matching gate arm and slide arm. Moving between ranges, such as from a 4 inch gate to a 5 or 6 inch gate, needs a different Gate Control. Email support@gritautomation.com with your order number and the gate size you need.

Can the gate stay open for a few seconds after I turn the tool off?

Yes. When a tool is tied to a collector, its gate stays open after the tool stops. It closes when another tool starts and needs a different gate. For a fixed run-on, set a Deactivation Delay in the Trigger's Advanced Power Profile. A 4-second delay keeps the collector running and the gate open for 4 more seconds. Miter saw users often do this so the collector doesn't cycle on and off.

How is Gate Control powered, and is the wire included?

Each Gate Control runs on 12V DC and ships with 10 feet of 18/2 solid-copper thermostat wire. Several Gate Controls can share one GRIT Power Bank 12V 20A. Each gate can draw up to 4 amps while moving, so size the Power Bank for the gates that might move at once and for your longest wire runs. For longer runs, standard 18/2 thermostat wire from any hardware store works.

What warranty comes with GRIT Gate Control?

GRIT at Home products come with a 1-year warranty. Add the optional GRIT at Home subscription, $5 a month, and your Triggers and Gate Controls stay under warranty for as long as you subscribe.

Specifications

Size 6", 5", 4", 3", 2.5"