GRIT Heavy Duty 120V 35A Trigger

Heavy-Duty Trigger

Plug-and-play power monitoring for 120V shop tools that draw more than 15 amps.

The Heavy Duty 120V Trigger handles the high-draw tools the standard 15A Trigger can't — table saws, planers, jointers, and other single-phase equipment up to 35A continuous. Plug it inline between the tool and the wall outlet, no wiring changes. When the tool powers on, the Hub opens the right blast gate, starts the collector, and logs the runtime automatically. One Trigger per tool.

Key Features

• 35A capacity: Handles high-draw 120V tools the 15A Trigger cannot
• Inline current sensing: Detects tool activation with no wiring changes
• Automated dust collection: Opens blast gates and starts collectors on tool-on
• Runtime logging: Tracks tool runtime automatically
• Status LED: Red & Green LED shows idle or running at a glance

Specifications

• SKUs GH-TR2001, GH-TR2002, GH-TR2003
• Voltage 120V
• Amperage 35A continuous
• Phase Single-phase
• Plug Options NEMA 5-15 (14 AWG) NEMA 5-20 (12 AWG) L5-20 (12 AWG)
• Connectivity GRIT Mesh Network
• Status Red & Green LED

In the Box

• 1x GRIT Heavy Duty 120V 35A Trigger in the plug type selected at checkout
• 1x Power cord — plug type customized

Compatibility

Works with any 120V single-phase tool drawing up to 35A continuous. Pair with GRIT Gates and Collectors for full dust-collection automation. For 220V tools, see the Heavy Duty 220V 35A Trigger. For three-phase or 50A+ loads, see the Industrial Trigger series.

Installation

Plug the tool into the Trigger, plug the Trigger into the wall outlet, and pair with the Hub through the GRIT App. No tools, no wiring, under two minutes.

*GRIT Hub is required for device functionality.

Important Notes

Verify your tool draws under 35A continuous on a 120V circuit before ordering.